ndn-autoreg

Usage

nfd-autoreg --prefix=</autoreg/prefix> [--prefix=</another/prefix>] ...

Description

autoreg-server is a deamon application that automatically registers the specified prefix(es) when new on-demand Face is created (i.e., when a new UDP face is created as a result of an incoming packet or TCP face is created as a result of an incoming connection).

Options

-h or --help

Produce help message.

-i or --prefix

Prefix that should be automatically registered when a new remote face is created. Can be repeated multiple to specify additional prefixes.

-c or --cost

RIB cost to be assigned to auto-registered prefixes. if not specified, default cost is set to 255.

-w or --whitelist

Whitelisted network, e.g., 192.168.2.0/24 or ::1/128. Can be repeated multiple times to specify multiple whitelisted networks.

Prefix(es) will be auto-registered only when remote IP address is within the specified range(s), except blacklist ranges.

Default: 0.0.0.0/0 and ::/0

-b or --blacklist

Blacklisted network, e.g., 192.168.2.32/30 or ::1/128. Can be repeated multiple times to specify multiple blacklisted networks.

Prefix(es) will be auto-registered only when remote IP address in NOT within the specified range(s), but is within the range define by the whitelist(s).

Default: none

Examples

Auto-register two prefixes for any newly created on-demand Face, except those that has source IP address in 10.0.0.0/8 network:

nfd-autoreg --prefix=/app1/video --prefix=/app2/pictures -b 10.0.0.0/8